5422 Timberlea Blvd., Mississauga, ONT. L4W 2T7, TEL: (905) 625-8779, FAX: (905) 625-9524

3300/3350 SERIES
Effective October 1, 1999

Component Number	Component Name	Component Profile	Material & Colour	Size
3300 Series for 1 5/8" (41) studs
CT-2 Ceiling Channel	Extruded Aluminum Full height ceiling track and cornice cap Optional vertical start on solid or glass conditions		Clear Anodized Black Brown	10'
CW-70-1 Floor Channel	Extruded aluminum Floor channel for solid or glass partition system Mates with CG-2		Clear Anodized Black Brown	10'
CW70-7 Glazing Member	Extruded aluminum Vertical finished ends Horizontal or vertical glazing member in all solid and glass combinations Vertical continuation of through post above cornice cap Mates with CG-2 and MT-1		Clear Anodized Brown	9' 10'
CG-2 Glazing Member	Extruded aluminum Horizontal or vertical glazing member in all glass combinations Vertical continuation of through post above cornice cap Mates with CW70-1, CT-2, CW70-7 and door frame section		Clear Anodized Brown	9' 10'
3350 Series for 2 1/2" (64) Studs
C-3 Ceiling Channel	Extruded aluminum Full height ceiling track and cornice cap Optional vertical start on solid conditions Mates with GP-2		Clear Anodized Black Brown	10'
FT-1 Floor Channel	Extruded aluminum Floor channel for solid or glass partition system Mates with GP-2		Clear Anodized Black Brown	10'
GP-1 Glazing Member	Extruded aluminum Vertical finish ends Horizontal or vertical glazing member in all solid and glass combinations Vertical continuation of through post above cornice cap Mates with GP-2		Clear Anodized Brown	9' 10'
GP-2 Glazing Member	Extruded Aluminum Horizontal or vertical glazing member in all glass combinations Vertical continuation of through post above cornice cap Mates with C-3, FT-1, GP-1 & door frame section		Clear Anodized Brown	9' 10'
CW70-8 Outside Corner	Extruded aluminum For all outside corner conditions Used in 3300 and 3350 series		Clear Anodized Brown	9' 10'
FS-1 Batten	Extruded aluminum Vertical and/ or horizontal batten strip Vertical at three way glass condition Used in 3300 and 3350 series		Clear Anodized Brown	10'
AB-1 Base	Screw in Alum. base 2 5/8" high Mates with V-2 Prepunched for easy installation		Clear Anodized Brown Black	10'
UC-1 Universal Clip	Support for horizontal or vertical glazing mullion 3350 series only		Mill finish	3/4"
PC Panel Clip (Progressive)	Box of 1000 Box of 500 screws included		Hardened steel	1 1/2" x 1 3/4"
CW90-9 Snap on Base	4' vinyl snap on base Mates with cw90-11 clip, below		Grey Black Brown	10'
CW90-11 Base Clip	Steel Mates with CW90-9		Galvanized	8'
C-4 Cap	PVC Cap for 1/2" Vinyl board Used as top trim on outside walls only		Grey Brown	10'
WS-1 WS-2	PVC Horizontal (top only) or all around Snap in glazing vinyl Mates with CW70-7, CG-2, GP-1, GP-2, CW90-1 and CW90-2		Grey Brown	9'
Flexible vinyl glass bead	GB-2 for 3/16" (5mm) glass GB-3 for 1/4" (6mm) glass		Grey Brown
V-2	PVC Vertical and/ or horizontal insert Mates with CW70-7, CW70-8, GP-1, FS-1 AB-1 and door frames		Black Grey Brown
GV-3	PVC Use to fill all exposed openings in CW70-7, CG-2, GP-1, GP-2		Black Grey Brown
DV-1	PVC Vertical and horizontal vinyl insert for door frame		Black Grey Brown
DV-4	Vertical and horizontal door mute		Grey

One piece aluminum extrusion Concealed factory mounted hinges Factory mounted strike plate Wood screws included Colour - Brown, clear anodized V-2 snap in cover not included Specify snap in or mitred header

[ close ]